Skip to content

Can't access web admin panel

web admin panel access

If you cannot access http://192.168.0.1 to log in to the Web Admin Panel, follow these steps to resolve the issue:

Note : If the router is set to Access Point, Extender, or WDS mode, you may not be able to access the Web Admin Panel using the default IP (>> 192.168.0.1>> ). In this case, use the IP address assigned to the VL7M19K router by the main router to access the panel.

Step 1: Check the Connection and Router IP Address

  • Ensure the WAN/LAN port connections are correct: The WAN port should be connected to an Internet source, and LAN ports should be connected to client devices.

  • If connecting via Wi-Fi, verify that you are connected to the correct SSID.

Step 2: Check the Router's IP Address (Windows 7/10/11)

The next steps depend on your device's IP address status:

Case 1: Incorrect IP Address

  1. Recheck the physical connections (Ethernet cables or Wi-Fi connection).

  2. Reset the router to factory default settings (refer to Section 10.2).

Case 2: Correct IP Address

  1. Ensure you are using Chrome or Firefox, then try accessing http://192.168.0.1 again.

  2. To avoid issues caused by browser cache:

  3. In Chrome, press Ctrl + Shift + N to open an incognito window.

  4. Try accessing http://192.168.0.1 again in the incognito window.